X8 MIG WELDER 2.4 Operation
3.
A list of work orders appears.
To select another work order, select it from the list.
To deselect the current work order, scroll up to the list and select No work order.
Recommended WPSs
Work orders and welds can include recommended Welding Procedure Specifications (WPSs). They help
welder to choose the correct WPS for the job, which reduces the risk of errors.
When you use Control Pad to select a work order or a weld that has recommended WPSs, Control Pad shows
a list of recommended WPSs and prompts you to select one of them.
The WPS recommendations are managed in WeldEye.
OPERATING MANUAL | EN 165
©
KEMPPI | 2018-09-28
To Next Page
Loading...
Need help?
General
