Kemppi X8 MIG User Manual

X8 MIG WELDER 2.3 Installation
3 2 1
Max. 20 Nm
9.
Place the gas cylinder on the cart.
10.
Fasten the straps in the cart around the gas cylinder.
2.3.2.3 Installing optional X8 Cooler
If your setup does not include X8 Cooler, you can skip these instructions.
Caution:
X8 Cooler must be installed by authorized service personnel. Do not open the covers of X8 Power
Source.
OPERATING MANUAL | EN 32
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English