Kemppi X8 MIG User Manual

X8 MIG WELDER 2.3 Installation
X8 Cable Rack
The cable rack holds the interconnection cable during transportation or storage.
Note:
This is an alternative accessory for the gas cylinder cart. Both cannot be installed at the same time.
X8 Accessory Tray
The accessory rack holds the small parts and tools needed for welding. Install it on the side of the welding
machine.
OPERATING MANUAL | EN 83
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English