Kemppi X8 MIG User Manual

X8 MIG WELDER 2.4 Operation
1. Material
Select the material of the welding piece.
2. Wire material
3. Wire diameter
4. Shielding gas
5. Type
Select welding/brazing or cladding.
6. Process
7. Polarity
Not available for all materials.
Which polarity is in use. If the polarity is positive (+), connect the + side to the wire feeder.
8. Welding program
After filtering, this column displays the suitable welding programs.
Channel view
Welding parameters are stored in the memory channels. The memory channel displays the same information
of the welding parameters as the Welding view. To take a channel into use, move the focus to it. Each user
has their own memory channels.
Figure 20: The Channel view
To adjust the welding parameters of the channel in focus, press the Menu or Settings button. When you
adjust a parameter, the number of the memory channel tilts to the right to indicate a difference from the
saved settings.
A WPS defines a range of values for welding parameters. If a WPS is used to create a memory channel, the
parameters are set in the middle of the range.
OPERATING MANUAL | EN 94
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English