To Next PageTo Next PageWhy is there no sound from one of the speakers on my Kenwood K-521 Speaker System?
If there is no sound from one of the speakers of your Kenwood Speaker System, check all connections as described in the manual section about connecting the system. Also, check the volume balance for the left and right speakers.
What to do if my Kenwood Stereo System has no radio reception?
If you are experiencing no radio reception, ensure that the antennas are connected. Also, select the broadcast band (AM or FM) and tune the radio to the frequency of the desired station.
Why is the [STANDBY/TIMER] indicator flashing red on my Kenwood Stereo System and there is no sound?
If the [STANDBY/TIMER] indicator is flashing red and there is no sound, it could be due to a short-circuited speaker cord. Unplug the power cord and then reconnect the speaker cord. If the problem persists, turn off the power to the main unit, unplug the power cord and request repairs.
How to fix a Kenwood Stereo System remote control that does not work?
If the remote control is not working, load new batteries and use the remote control within its effective range.
What to do if there is interference (noise) with my Kenwood Stereo System?
To address interference (noise), install an outdoor antenna away from roads. Also, turn off any electrical appliances that may be causing interference and move the system away from the TV.
What to do if there is no sound output when USB flash memory or a USB audio player is connected to my Kenwood Stereo System?
If there is no sound output when USB flash memory or a USB audio player is connected, plug in the USB flash memory correctly. Also, connect the USB cable correctly and check to make sure the USB audio player is turned on.
What to do if my iPod does not provide sound when connected to my Kenwood Stereo System?
If the iPod does not provide sound, the iPod is not properly connected. Also, remove the iPod from the system, and then connect it again.
What to do if my iPod cannot be charged by my Kenwood Stereo System?
If the iPod cannot be charged, the iPod is not properly connected. Also, remove the iPod from the system, and then connect it again.
What should I do if Auto Memory doesn't get radio reception on my Kenwood Stereo System?
If you have used Auto Memory and pressed the [P.CALL] key, but you still can't get radio reception, run Auto Memory again. Also, manually preset stations with frequencies that you can receive.
What does it mean if the clock display is flashing on my Kenwood Stereo System?
If the clock display is flashing, set the clock.
General| Brand | Kenwood |
|---|---|
| Model | K-521 |
| Category | Speaker System |
| Language | English |
Instructions and warnings before powering on the system for safe operation.
Safety instructions for cleaning, attachments, water use, ventilation, power, and polarization.
Safety instructions regarding object/liquid entry, servicing, damage, replacement parts, and external hazards.
Overview of primary connections including antennas, power, and speakers.
Guidance on connecting iPod, USB, and digital audio players.
Identification of main unit controls, ports, and remote control functions.
Guide to understanding error messages and resolving common operational problems.
