Kenwood K-521 - Handling Discs

K-521
24
Important Information
Cautions on CD discs
Always use a disc carrying the marking.
A disc without this marking may be unable to be play
back correctly.
The disc rotates at a high speed during playback.
Never use a cracked, chipped or greatly warped disc.
Other wise, damage or malfunction of the player may
result.
Also, do not use a
disc with a non-circular shape as this
may result in malfunction.
Handling precautions
Hold a CD taking care not to touch the played surface.
Discs playable on the system
This system can play back a CD (12 cm, 8 cm), CD-ROM,
CD-R, CD-RW or the audio part of a CD-EXTRA disc.
Notes on CD-ROM/CD-R/CD-RW discs
If the CD-ROM, CD-R or CD-RW disc being used has a
printable label sur face, the label sur face may cause
sticking that makes it impossible to remove the disc
from the system. To prevent malfunction of the system,
do not use
such a disc.
Handling Discs
Notes on transporting or moving the system
Before transporting or moving this unit, take the following actions:
1
Remove any CDs from the unit.
2
Press the [CD
E
] key and check to make sure that the message "NO DISC" appears on the display.
3
Wait a few seconds and then turn the system off .
4
If there are any other components connected to the system, check to make sure they are all turned off before
disconnecting the cables.
K-521EB60-5813-0801GVT0294-002A.indb24K-521EB60-5813-0801GVT0294-002A.indb24 09.10.264:31:54PM09.10.264:31:54PM