KERN CFS User Manual

CFS/CCS-BA-e-1220 69
Menu settings:
Call up menu
 Switch-on balance and during the selftest press .
The first menu block is displayed.
 Press repeatedly or (in CFS 50K-3 models) press
again until is displayed.
   
 Confirm with TARE. The request to enter the password
appears.
 Or as standard password enter four times zero "0000" or the
stored password (input see parameter ). Any other
password can be overwritten with "9999".
 Confirm with TARE
 Use to select the balance which should be configured
(bulk material/reference balance).
The appeared [] displays the current balance.
Confirm with TARE.

 Use UNIT to select the weighing unit [kg or lb], where the
adjustment shall be made.
The appeared [] displays the current weighing unit.
Confirm with TARE , the first menu item is displayed.


KERN CFS Specifications

General

Plate material	stainless steel
Readability	0.01 g
Reproducibility	0.01g
Calibration	External calibration
Display	LCD
Weighing units	g, lb, oz
Operating temperature	10 °C - 40 °C
Functions	counting, weighing
Interface	RS-232