Header
⎬
Line
------------------- Start drying-------------------
Program nb : 1
Name: Floar 100
Profiles standard
Dry temp. : 120 °C
Switch off : Automatical 3
Result : Moisture contents - %M
Printout int : 30 s
Target : None
T. coeficient : 0.00
Start weight : 9,993 g
0:00:30 0.01 %M
0:01:00 0.02 %M
0:01:30 0.03 %M
Final mass : 9,990 g
Dry time : 0:01:45
Final result : 0.03 %M
--------- End of drying procedure ---------
⎬
Footer
8.1.6.2 User-defined data output (1 printout 1 ↔ 4. Print)
Here you can define 4 different kinds of data output.
Ö The content of the data output is defined as follows.
First line 1. Printout 1 start -.1, i.e. text begins at line 1 (1. text)
Last line 1. Printout stop - 20, i.e. text ends at line 20 (20. text)
Ö Text input per line is carried out via the arrow keys (see chapter 7.1) in the
respective strings.
1. Text Start of text input
20. Text End of text input
During text input lines may overlap, e.g.:
1. Print-out start – 1
1. Print-out stop – 40
2. Print-out start – 20
2. Print-out stop – 40
To Next Page
Loading...
