MLS-BA-defsi-0713
122
Ö Close lid
Ö Drying will start automatically as soon as
the balance is at rest.
Ö The processing parameters (target temperature,
processing parameters, processing time,
calculation method, etc. ) can be read on the
display.
Ö The key allows to select between the various
calculation methods.
Ö The display shows when the dying process is
completed.
Ö The final result can be read on the display
Output processing result by actuating the key.
Example:
------------------- Start drying-------------------
Program nb : 1
Name: Floar 100
Profiles standard
Dry temp. : 120 °C
Switch off : Automatical 3
Result : Moisture contents - %M
Printout int : 30 s
Target : None
T. coeficjent : 0.00
Start weight : 9,993 g
0:00:30 0.01 %M
0:01:00 0.02 %M
0:01:30 0.03 %M
Final mass : 9,990 g
Dry time : 0:01:45
Final result : 0.03 %M
--------- End of drying procedure ---------
To Next Page
Loading...
