PES/PEJ-BA-e-1316
3.4. Monitoring of Test Resources
In the framework of quality assurance the measuring-related properties of the bal-
ance and, if applicable, the testing weight, must be checked regularly. The responsi-
ble user must define a suitable interval as well as type and scope of this test. Infor-
mation is available on KERN’s home page (www.kern-sohn.com) with regard to the
monitoring of balance test substances and the test weights required for this. In
KERN’s accredited DKD calibration laboratory test weights and balances may be
calibrated (return to the national standard) fast and at moderate cost.
4. Basic Safety Precautions
4.1. Pay attention to the instructions in the Operation Manual
Carefully read this operation manual before setup and com-
missioning, even if you are already familiar with KERN bal-
ances.
Versions in other languages are non-binding translations.
The only binding version is the original document in German.
4.2. Personnel training
The appliance may only be operated and maintained by trained personnel.
5. Transport and storage
5.1. Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the
appliance itself when unpacking for possible visible damage.
5.2. Packaging
Keep all parts of the original packaging in case you need to return the appliance.
Only use original packaging for returning.
Before sending, disconnect all connected cables and loose/movable parts.
Attach possibly existing transport safeguards. Secure all parts, e.g. glass windshield,
weighing plate, power unit etc., to prevent slipping and damage.
To Next Page
Loading...
Need help?
General
