KERN PES Series - 12.4.2. Entering 3 or 4 limits by weighing

PES/PEJ-BA-e-1316
63
12.4.2. Entering 3 or 4 limits by weighing
Operation
Display
1. Activate tolerance weighing function
[ ] or [ ] (see chap. 7).
2. Actuate required parameter selection
or
until
[ ] or [ ] is displayed;
more settings of your choice (see chap.
12.3) are carried out in the same way
Parameter selection for 3 limiting points:
Parameter selection for 4 limiting points:
Parameter selection for absolute value:
3. Leave function menu
g