KERN PES Series - 10.3. Percent determination

PES/PEJ-BA-e-1316
47
10.3. Percent determination
Percent weighing allows to display weight in percent, in relation to a reference
weight. The displayed weighing value is stored as a standard percent value
(default setting: 100%).
10.3.1. Entering the reference weight by weighing
Operation
Display
Activate function [ ]
(see chap. 7).
The display shows the %-symbol.
%
Determine reference weight:
Press for about 4 seconds, until
[ ] is displayed, then
release
The display shows flashing the last
saved reference weight
Put on reference weight (=100 %)
An acoustic signal sounds; the reference
weight is saved.
Remove reference weight.
%