PES/PEJ-BA-e-1316
15. Service, maintenance, disposal
15.1. Cleaning
Before cleaning, please disconnect the appliance from the operating voltage.
Please do not use aggressive cleaning agents (solvents or similar agents), but a
cloth dampened with mild soap suds.
The weighing terminal has a pressure compensation device.
This is underneath the terminal and made of a glued on membrane.
When cleaning please ensure that the membrane is not damaged or soiled.
15.2. Service, maintenance
The appliance may only be opened by trained service technicians who are autho-
rized by KERN.
Before opening, disconnect from power supply.
15.3. Disposal
Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.
16. Instant help
In case of an error in the program process, briefly turn off the balance and discon-
nect from power supply. The weighing process must then be restarted from the be-
ginning.
To Next Page
Loading...
Need help?
General
