PES/PEJ-BA-e-1316
An acoustic signal sounds, the saved
second weighing value is briefly dis-
played.
The flashing display (last saved value)
prompts you to enter the third limiting
value ( )
9. To enter 3rd and 4th limiting value,
repeat steps 7 and 8
10. Save:
The balance returns to tolerance weigh-
ing mode.
From here, evaluation is carried out
whether the goods to weighed are within
the tolerance limits.
An acoustic signal sounds, the last
saved 3rd or 4th limiting value is briefly
displayed.
Display of tolerance mark
+ [ ] 4. limit point
[ ] 3. limit point
TOL
[ ] 2. limit point
[ ] 1. limit point
To Next Page
Loading...
