Keysight Technologies AC6801B - Page 167

Error Code Error Text
-131 Invalid suffix
-138 Suffix not allowed
-140 Character data error
-141 Invalid character data
-144 Character data too long
-150 String data error
-151 Invalid string data
-158 String data not allowed
-211 Trigger ignored
-213 Init ignored
-214 Trigger deadlock
-220 Parameter error
-221 Settings conflict
-222 Data out of range
-224 Illegal parameter value
-230 Data corrupt or stale
-241 Hardware missing
-310 System Error
-311 Memory Error
-313 Calibration memory lost
-314 Save/recall memory lost
-315 Configuration memory lost
-330 Self-test error
-350 Queue overflow
-363 Input buffer overrun
-410 Query INTERRUPTED
-420 Query UNTERMINATED
-430 Query DEADLOCKED
+101 Calibration state is off
+102 Calibration password is incorrect
+104 Bad sequence of calibration commands
+107 Programming cal constants out of range
+108 Measurement cal constants out of range
+117 Calibration error
+130 Remote calibration is inhibited by local operation
+131 Operation conflicts with OUTPUT ON state
+132 Operation conflicts with protection state
Keysight AC6800B Series Operating and Service Guide 167
3SCPI Programming Reference