Keysight B1500A Configuration and Connection Guide
1-31
B1500A Product Configuration
EasyEXPERT group+ software
1.5.2 EasyEXPERT group+ Software for PC
Keysight EasyEXPERT group+ for PC is the same software that is built-in to the PC-based
Keysight B1500A Semiconductor Device Analyzer, except that it runs on a standalone PC.
In addition, EasyEXPERT group+ for PC supports Offline mode and control capability of
the following 4155 series and E5270 series.
NOTE The latest revision of EasyEXPERT group+ software is available on the
“www.keysight.com/find/easyexpert” web site.
• Execution mode
Online and offline
• Supported instruments
• B1500A Semiconductor device analyzer
• B1505A Power device analyzer / Curve tracer
• 4155B/4155C Semiconductor parameter analyzer
• 4156B/4156C Precision semiconductor parameter analyzer
• E5260A IV Analyzer / 8 Slot High speed Measurement Mainframe
• E5262A/E5263A 2 Channel IV Analyzer / Source Monitor Unit
• E5270B Precision IV Analyzer / 8 Slot Precision Measurement Mainframe
• Supported 4155/4156 functionality
• I/V sweep
• I/V-t sampling (except thinned out mode)
• VSU/VMU (except differential voltage measurement using VMU)
• PGU (41501B)
• Switching matrix control
• 4155/4156 functions unsupported by EasyEXPERT group+
• Log sampling measurement and Thinned out sampling measurement
• Functions using R box
• Differential voltage measurement using VMU (Voltage Monitor Unit)
• DC bias output using PGU (Pulse Generator Unit) in the 41501B
• Other functions unavailable for the B1500A
NOTE To control 4155/56 by EasyEXPERT group+, the following 4155/4156 firmware is
required.
HOSTC: 03.08 or later
SMUC: 04.08 or later
To Next Page
Loading...
Need help?
General
