Keysight Technologies N6972A with Option 301 User Manual

OUTPut:RELay:LOCK[:STATe]0|OFF|1|ON
OUTPut:RELay:LOCK[:STATe]?
Enables or disables the locked-closed state of the output relays. When locked, the output relays
remain closed and do not change with the output state. This improves the output response time for
applications that do not require a physical output disconnect. This parameter is saved in non-volatile
memory.
Parameter Typical Return
0|OFF|1|ON 0or1
Locks the output relays closed: OUTP:REL:LOCK ON
OUTPut:RELay:POLarity NORMal|REVerse
OUTPut:RELay:POLarity?
Sets the polarity of the output relays. Polarity reversal affects both the output and the sense
terminals. Normal causes the output polarity to be the same as the output connector labeling.
Reverse causes the output polarity to be the reverse of the output connector labeling. This briefly
turns the output off while the output and sense terminal polarities are switched.
Parameter Typical Return
NORMal|REVerse, *RST NORMal NORM or REV
Sets the output polarity to Reverse: OUTP:REL:POL REV
OUTPut:RELay:POLarity:ENABle 0|OFF|1|ON
OUTPut:RELay:POLarity:ENABle?
Enables or disables the polarity reversal function. This prevents accidental output polarity reversal.
This parameter is saved in non-volatile memory.
Parameter Typical Return
0|OFF|1|ON 0or1
Disables the polarity reversal commands: OUTP:REL:POL:ENAB OFF
6 SCPI Programming Reference
253 Keysight N6900/N7900 Series Operating and Service Guide

Keysight Technologies N6972A with Option 301 Specifications

General

Brand	Keysight Technologies
Model	N6972A with Option 301
Category	Power Supply
Language	English