Specifications and Characteristics
Specifications - Keysight N6900 Series
Specifications - Keysight N7900 Series
Specifications - Keysight N6900/N7900 High Voltage Series
Supplemental Characteristics - Keysight N6900 Series
Supplemental Characteristics - Keysight N7900 Series
Supplemental Characteristics - Keysight N6900/N7900 High Voltage Series
Common Characteristics
Output Impedance Graphs
Inductive Load Boundary
Output Quadrants
Voltage Programming Response
Output Dynamic Response
Measurement Accuracy and Resolution
Dimension Diagrams
Introduction
Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to
40°C after a 30-minute warm-up period. Specifications apply at the output terminals, with the sense
terminals connected to the output terminals (local sensing). Accuracy specifications are warranted for
one year.
Supplemental characteristics are not warranted but are descriptions of performance determined
either by design or by type testing. All supplemental characteristics are typical unless otherwise
noted.
1 Quick Reference
40 Keysight N6900/N7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
