Introduction to the Instrument
Regenerative Power System at a Glance
Front Panel at a Glance
Rear Panel at a Glance
Front Panel Display at a Glance
Front Panel Keys at a Glance
Safety Disconnect System at a Glance
Regenerative Power System at a Glance
The Keysight Regenerative Power System (RPS) Family includes 3U rack-mountable DC power
supplies with performance and features that are optimized for automated test systems. The output
and system features are described as follows. The Models and Options section describes the features
that apply to specific models.
Output features
l Full programming capability for the entire range of output voltage and current
l Output autoranging for greater flexibility
l Output can operate in voltage priority or current priority mode
l High-speed up and down output programming
l Output resistance programming
l Turn-on/turn-off delays allow output on/off sequencing across multiple units
l Current sharing capability for paralleled outputs
l Protection capability includes over-voltage, over-current, and over-temperature
l Two-quadrant operation provides current sourcing and sinking capability
l 100% rated current-sink capability
l 5 kW and 10 kW rated models
Measurement features
l 5.12 microsecond sample rate
l Real-time power measurements
l A-hour & W-hour measurement
l Digitized measurement capability
1 Quick Reference
16 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
