Features and Functions 3
Keysight 34980A Mainframe User’s Guide 115
Clearing 34980A Memory
For security reasons, you may want to clear memory in the 34980A.
Volatile Memory
The following settings are stored in volatile memory:
– All measurement results
– Any non-default internal DMM settings
– Any non-default channel configurations
– Any non-default Mx+B scaling constants
–All alarm settings
Front Panel Operation:
To clear all measurement results and settings held in volatile memory, cycle
power to the 34980A.
Remote Interface Operation:
To clear all measurement results and settings held in volatile memory, send
the *RST command.
Non-Volatile Memory
The following settings are stored in non-volatile memory:
– Optional channel labels
– Real-time system clock setting
– Front-panel number format setting
– GPIB address setting
–LAN settings
– Stored instrument states
To Next Page
Loading...
