2 Getting Started
46 Keysight 34980A Mainframe User’s Guide
Installing and Connecting Modules
For most applications, prior to using the 34980A you will select and install
modules, and make connections with terminal blocks or cabling. The following
sections illustrate module and terminal block installation.
Removing a Slot Cover
Your 34980A is shipped from the factory with one slot uncovered and the
remaining seven slots covered (the illustration below shows a module already
inserted in Slot 1). When you are ready to install additional modules in the seven
remaining slots, you must first remove its slot cover. Using a flat blade
screwdriver, pry each side of the slot cover until the cover releases from the slot.
When any slot covers are removed, hazardous voltages may be exposed on
the analog bus connectors.
Install current limiting devices between high energy sources and the module
inputs.
To Next Page
Loading...
