Getting Started 2
Keysight 34980A Mainframe User’s Guide 45
Indicates an over-temperature condition. When lit, one or more general purpose (34937A/34938A)
modules have reached their over-temperature limits.
ALARM (H1234L) A HI or LO alarm condition has occurred on the indicated alarms.
Alarms are enabled on the displayed channel.
Mx+B Scaling is enabled on the displayed channel. This appears on display after you have selected the
scaling function via the front panel or remote interface.
4W A 4-wire measurement is specified on the displayed channel. This appears on the display after you
have selected the 4-wire function via the front panel or remote interface.
OC Lit when Offset Compensation has been specified for a given measurement. This appears on the
display after you have selected the offset compensation function via the front panel or remote
interface. For more information, see “Offset Compensation” on page 142
*
A measurement is in progress.
Display Indicator Definition
To Next Page
Loading...
