Features and Functions 3
Keysight 34980A Mainframe User’s Guide 139
SENS:TEMP:TRAN:FRTD:TYPE 91,(@1003)
The following command sets the nominal resistance (R
0
) to 1000Ω on channel
1003.
SENS:TEMP:TRAN:FRTD:RES 1000,(@1003)
Thermistor Measurements
The instrument supports 2.2 kΩ (YSI Series 44004), 5 kΩ (YSI Series 44007), and
10 kΩ (YSI Series 44006) thermistors.
Front Panel Operation:
To select the thermistor function for the active channel,
choose the following items.
DMM or Channel (Configure) > TEMPERATURE > PROBE TYPE >
THERMISTOR
To select the thermistor type for the active channel, choose from the following
items.
THERMISTOR TYPE > 10K|5K|2.2K
Remote Interface Operation:
You can use the CONFigure or MEASure?
command to select the probe type and thermistor type. For example, the following
command configures channel 3001 for measurements of a 5 kΩ thermistor:
CONF:TEMP THER,5000,(@3001)
You can also use the SENSe command to select the probe type and thermistor
type. For example, the following command configures channel 1003 for
measurements of a 10 kΩ thermistor:
SENS:TEMP:TRAN:THERM:TYPE 10000,(@1003)
To Next Page
Loading...
