Keysight 34980A - Selecting the Allow Full Control Mode

2 Getting Started
88 Keysight 34980A Mainframe User’s Guide
2 From this page, you can view and modify the configuration of the modules
currently installed in the 34980A.
When you first launch this page, the configuration of the module in the lowest
numbered slot is shown (shown in bold text). To view the configuration of a
different module, click on the desired module name from the list (slots are
numbered 1 through 8).
Selecting the “Allow Full Control” Mode
Select the Allow Full Control radio button as shown. Once enabled, this mode
allows you to open and close channel relays and modify the state of the installed
modules.