Getting Started 2
Keysight 34980A Mainframe User’s Guide 89
Setting a Web Browser Password
If desired, you can control access to the 34980A Web Interface using password
protection. As shipped from the factory, no password is set. To set a password
(available from the front panel only), navigate to the WEB PASSWORD menu
selection from the 34980A front panel, as follows:
Utility > REMOTE I/O > LAN > LAN SETTINGS > MODIFY > . . . WEB PASSWORD
Use the front panel knob and control keys to enter your password, then press Exit
Menu to save it.
Once specified, this password must be provided to transition from the Observe
Only mode to the Allow Full Control mode
To Next Page
Loading...
