Keysight 34980A - Menu Example 3: Configuring the DMM for a Measurement

2 Getting Started
66 Keysight 34980A Mainframe User’s Guide
Menu Example 3: Configuring the DMM for a Measurement
This example uses the internal DMM for a measurement. It can be used with any
of the multiplexer modules (34921A, 34922A, 34923A, 34924A, or 34925A). If you
have disabled your internal DMM, don't have one installed in your 34980A, or are
not using a multiplexer module, skip this example.
1 Make sure you have a multiplexer module installed in slot 1. Select any
channel on this module (the channel number is shown in green channel field
on display).
2 Within the Configure key group, press DMM to set the measurement
parameters for the internal DMM. Note that the DMM key lights.
3 Using the knob to navigate through the menu choices, select the AC VOLTS
function.
4 Press the lighted DMM key to accept the ac voltage function.
2