Keysight 34980A - Page 165

Features and Functions 3
Keysight 34980A Mainframe User’s Guide 165
Relative Format (Default):
Absolute Format:
– The reading format applies to all readings being removed from the instrument
from a scan; you cannot set the format on a per-channel basis.
–The CONFigure and MEASure? commands automatically turn off the units,
time, channel, and alarm information.
– The format settings are stored in volatile memory and will be lost when power
is turned off or after a Factory Reset (*RST command).
Remote Interface Operation: Use the following commands to select the
reading format.
FORMat:READing:ALARm ON
FORMat:READing:CHANnel ON
FORMat:READing:TIME ON
FORMat:READing:TIME:TYPE {ABSolute|RELative}
FORMat:READing:UNIT ON
1
2
Reading with units (26.195 °C)
Time since start of scan (17 ms)
3
4
Channel number
Alarm limit threshold crossed
(0 = No Alarm, 1 = LO, 2 = HI)
2.61950000E+01 C,000000000.017,1003,2
1 2 4
3
1
2
3
Reading with units (26.195 °C)
Date (November 21, 2004)
Time of day (3:30:23.000 PM)
4
5
Channel number
Alarm limit threshold crossed
(0 = No Alarm, 1 = LO, 2 = HI)
2.61950000E+01 C,2004,11,21,15,30,23.000,1003,2
1 3 542