3 Features and Functions
170 Keysight 34980A Mainframe User’s Guide
Front Panel Operation:
DMM or Channel (Measure)
For channel monitoring, turn the knob to the desired channel. To stop a Monitor,
press the lighted key again.
Remote Interface Operation:
Use the following command to select between
the channel Monitor mode (default) and the internal DMM monitor mode.
ROUTe:MONitor:MODE {CHANnel|DMM}
The following program segment selects the channel to be monitored (specify only
one channel) and enables the Monitor function.
ROUTE:MON:CHAN (@1003)
ROUTE:MON:CHAN:ENABLE ON,(@1003)
ROUTE:MON:STATE ON
The following program segment enables the Monitor function on the internal
DMM:
ROUTE:MON:MODE DMM
ROUTE:MON:STATE ON
To read the monitor data from the selected channel or the internal DMM, send the
following command. Each reading is returned with measurement units, time
stamp, channel number, and alarm status information (see “Reading Format” on
page 164).
ROUTe:MONitor:DATA?
To Next Page
Loading...
