Keysight 85024A - Page 40

5 Performance Tests
40 Keysight 85024A User’s and Service Guide
Setting the output power level
Performing a response calibration
871x family Press [POWER].
8753 family
Press [Menu] or [Sweep Setup] to access Power.
871xC and
871xET
Press [CAL], then Response.
Press Measure Standard when the through cable is
connected.
871xES
Press [CAL], User Response, then Response.
Press Measure Standard when the through cable is
connected.
8753 family
Press [Cal], CALIBRATE MENU, then Response.
Press THRU when the through cable is connected.