Keysight 85024A - Table 6-2 Replaceable Parts

6 Replaceable Parts
52 Keysight 85024A User’s and Service Guide
Table 6-2 Replaceable parts
Item
[a]
Part number Qty Description
1 85024-60013 Connector replacement kit
2 85024-20024 1 RF bead
3 85024-20016 1 Transition-nut
4 85024-20017 1 Transition-REG
5 0515-0912 2 Screw-machined M3 x 0.5 8 mm-LG pan head
6 85024-20028 1 Frame casting
7 85024-20025 1 Nut, strain relief
8 85024-60014 Cable/Probe wand kit (pre-assembled)
9 0515-0659 2 Screw-machined M2 8 mm-LG pan head
10 0515-0658 2 Screw-machined M2 6 mm-LG pan head
11 85024-20015 1 Probe nut
12 85024-60015 1 Short power tip (also used on 10:1 divider)
85024-60016 1 Long power tip
13 85024-60011 1 Nose assembly
14 85024-40007 1 Conductive washer
15 85024-60005 1 Amplifier microcircuit
16 85024-20037 1 Clip spring for elastic conductive strip
17 85024-20035 1 Elastic conductive strip
18 85025-40006 1 Regulator assembly plastic cover
A1 85024-63071 1 Regulator assembly (internal PC board)
19 85024-00002 1 Housing reinforcement
20 5040-0494 1 Connector sleeve (power)
21 5060-0466 1 Connector body (power)
[a] See Figure 6-1, “Replaceable parts identification” on page 53.