E8257D/67D, E8663D PSG Signal Generators Service Guide
2-1
2 Replaceable Parts
Ordering Information
To order a part, do the following:
1. Determine the part number.
2. Determine the quantity required.
3. Mail this information to the nearest Agilent Technologies office or, in the U.S., call the hot–line number listed in
the following section.
To order a part not listed in the replaceable parts lists, mail the following information to the nearest Agilent
Technologies office or, in the United States, call the hot–line number listed in the following section.
1. the instrument model number
2. the serial number and options, if any (see rear panel)
3. a description of the part
4. a description of the part’s function
5. the quantity required
Order Parts Fast
When you have gathered the information required to place an order, go to the Agilent Technologies Technical Support
website:
http://www.agilent.com/find/techsupport
Frequency, Hardware, and Personality Options
This section lists the options available with an Agilent E8257D/67D, E8663D PSG signal generator.
Frequency Options
503 100 kHz to 3.2 GHz frequency range (E8663D Only)
509 100 kHz to 9 GHz frequency range (E8663D Only)
520 250 kHz to 20 GHz frequency range (E8257D/67D Only)
521 10 MHz to 20 GHz frequency range (E8257D Only)
532 250 kHz to 32 GHz frequency range (E8257D/67D Only)
540 250 kHz to 40 GHz frequency range (E8257D Only)
544 250 kHz to 44 GHz frequency range (E8267D Only)
550 250 kHz to 50 GHz frequency range (E8257D Only)
567 250 kHz to 67/70 GHz frequency range (E8257D Only)
Hardware Options
1E1 Adds output step attenuator for extended range to −135dBm (E8257D and E8663D Only)
1EA (Discontinued) Adds high RF output power +20dBm at 20 GHz, +14 dBm at 40 GHz (E8257D Only)
1ED Specifies Type–N RF output connector (20 GHz models only)
1EH Adds improved harmonics
To Next Page
Loading...