1st Menu Level 2nd Level 3rd & 4th Levels Description
Repeat Specifies number of list repetitions or continuous list
Terminate Specifies list settings when the list terminates
Config Configures voltage, current, resistance, or power list settings
Reset Aborts the list and resets all list parameters
Arb Repeat Specifies the number of times the Arb repeats
Terminate Specifies the settings when the Arb terminates
Function Selects the Arb type and shape
Config Step
Specifies the Step level and time
Ramp Specifies the Ramp level and time
Stair Specifies the Staircase level and time
Sine Specifies the Sine parameters
Pulse Specifies the Pulse level and time
Trap Specifies the Trapezoid level and time
Exp Specifies the Exponent parameters
CD Specifies the Constant-Dwell parameters
TrigSource Specifies the transient and Arb trigger sources
Control Initiates, Triggers, or Aborts triggers; displays trigger state
Protect OVP Configures over-voltage protection function
OCP Configures over-current protection function
OPP Configures over-power protection function
OT Returns the over-temperature protection margin
Inh Configures the external inhibit signal
Coupling Disables ALL output channels for a protection fault
Wdog Configures the output watchdog timer
Osc Enables/disables oscillation protection on N678xA SMU
Clear Clears protection conditions and displays output status
States Reset Resets all instrument settings to the reset(*RST) state
SaveRecall Saves and recalls instrument settings
PowerOn Selects the power-on instrument state
1 Quick Reference
24 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
