Keysight N6700C Series Operating and Service Guide
6
Verification and Calibration
Test Equipment and Setups
Performance Verification
Module Calibration
Test Record Forms
The verification procedures described in this section verify that the Keysight
Series N6700C Modular Power System is operating normally and is within
published specifications.
Perform the verification tests before calibrating your power system. If the
power system passes the verification tests, the power modules are operating
within their calibration limits and do not need to be re-calibrated.
Keysight N6700C, N6701C, and N6702C MPS mainframes do
not require calibration.
To Next Page
Loading...
