Display Commands
Display commands control the front panel display.
DISPlay[:WINDow][:STATe] 0|OFF|1|ON
DISPlay[:WINDow][:STATe]?
Turns the front panel display on or off.
Parameter Typical Return
0|OFF|1|ON, *RST ON 0or1
Turns the front panel display off: DISP OFF
DISPlay[:WINDow]:CHANnel <channel>
DISPlay[:WINDow]:CHANnel?
Selects the output channel to display on the front panel in single-channel view (METER1).
Parameter Typical Return
1|2|3|4, *RST 1 1|2|3|4
Sets the front panel to display channel 4: DISP CHAN 4
DISPlay[:WINDow]:VIEW METER1|METER4|METER_VIP
DISPlay[:WINDow]:VIEW?
Selects the output channel view of the front panel display. METER1 displays one output channel.
METER4 displays all output channels up to a maximum of four. METER_VIP displays voltage, current,
and power for one channel.
Parameter Typical Return
METER1|METER4|METER_VIP, *RST METER1 METER1, METER4, METER_VIP
Sets the front panel to display up to four channels: DISP VIEW METER4
Keysight N6700C Operating and Service Guide 241
5 SCPI Programming Reference
To Next Page
Loading...
