Firmware Update
Refer to Instrument Identification to determine which firmware version is installed on
your instrument.
l Download and unzip the Keysight N6700 Firmware Update file located under "Documents & Down-
loads" at the bottom of the Web page. Make a note of where you saved the unzipped file.
l Download and install the Keysight N6700 Firmware Update Utility located under "Documents &
Downloads" at the bottom of the Web page. You can skip this step if the utility is already installed
on your computer.
l Run the Keysight N6700 Firmware Update Utility and update the firmware on your instrument.
Select Start > Programs > Keysight > Firmware Update Utility.
l Cycle power to the mainframe. The updated firmware will be running when power is reapplied.
Restricting Access
Note that you can restrict access to the instrument by the firmware update utility. This prevents
unauthorized users from updating the firmware.
Front Panel Menu Reference SCPI Command
Select System\Admin\Update
Check the Must log in as admin box.
This requires a user to log into the Admin menu before the
firmware updateutility performs a firmware update.
Not available
Keysight N6700C Operating and Service Guide 405
7 Service and Maintenance
To Next Page
Loading...
