Keysight N6702C - Page 390

Test Record Form - Keysight N6773A
Keysight N6773A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
+ 10 mV
Vout − 20 mV
19.96 V
Vout − 40 mV
_______
_______
_______
_______
+ 50 mV
Vout + 20 mV
20.04 V
Vout + 40 mV
CV Load Effect: – 13 mV _______ + 13 mV
CV Source Effect: – 2 mV _______ + 2 mV
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
+ 20 mV
+ 3 mV
Transient response
Voltage @ 250 μs:
Voltage @ 250 μs with Option 760/761:
– 300 mV
– 350 mV
_______
_______
+ 300 mV
+ 350 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
− 30 mA
Iout − 15 mA
14.9175 A
Iout − 37.5 mA
_______
_______
_______
_______
+ 90 mA
Iout + 15 mA
15.0825 A
Iout + 37.5 mA
CC Load Effect: – 6 mA _______ + 6 mA
CC Source Effect: – 1 mA _______ + 1 mA
Test Description N6773A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
CC Load Effect, Source Effect:
30 mV, 15 A
20 V, 15 A
20 V, 15 A
20 V, from 7.5 A to 15 A
30 mA, 20V
15 A, 20 V
15 A, 20 V
6 Verification and Calibration
390 Keysight N6700C Operating and Service Guide