Parallel and Series Connections 67
Parallel Connections 67
Series Connections 69
Auxiliary Measurement Connections 72
Interface Connections 73
GPIB Connections 73
USB Connections 74
LAN Connections - site and private 74
Digital Port Connections 76
3 Getting Started 79
Using the Front Panel 80
Turn the Unit On 80
Select an Output Channel 80
Set the Output Voltage 81
Set the Output Current 81
Enable the Output 82
Use the Front Panel Menu 82
Remote Interface Configuration 85
USB Configuration 85
GPIB Configuration 85
LAN Configuration 86
Modifying the LAN Settings 87
Using the Web Interface 90
Using Telnet 91
Using Sockets 92
Securing the Interfaces 92
4 Operating the Power System 93
Programming the Output 94
Select a Channel View 94
Select an Output Channel 95
Set the Output Voltage 95
Set the Output Current 95
Set the Output Resistance 96
Set the Output Power 97
Set the Output Mode 98
Set the Slew Rate 98
Enable the Output 99
Sequence Multiple Outputs 100
Program the Output Relays 100
Set the Output Bandwidth 101
Set the Output Turn-Off Mode 102
Programming an Input Short 102
Enable Under-Voltage Inhibit 103
Stepping the Output 104
Synchronizing Output Turn-On 108
Synchronizing Output Turn-On Delays 108
Synchronizing Multiple Mainframes 111
Keysight N6700C Operating and Service Guide 4
To Next Page
Loading...
