Keysight N9322C - Page 161

153
Command Reference
Channel Scanner Option Subsystem
Example: :CHSCanner:EDIT:LIST:ADD:STD
"d:/CDMA-AWS_DL.STD,11"
Key access: Meas > List Edit > Insert > Edit Method Std > Signal Std
Modify Channel By Custom For List Sweep
:CHSCanner:EDIT:LIST:MODify:CUSTom
<index>,<freq>,<band-
width>{,<index>,<freq>,<bandwidth>}
This command edit the sweep channel by custom, and it
requires to input the channel index, new center frequency
and new bandwidth.
Example: :CHSCanner:EDIT:LIST:MODify:CUSTom
1,10000000,10000,2,20000000,20000
Key access: Meas > List Edit > Edit > Edit Method > Custom
Modify Channel By Signal Standard for List Sweep
:CHSCanner:EDIT:LIST:MODify:STD <index>,<signal
std.>,<ch. no>{,<index>,<signal std.>,<ch. no>}
This command modify scan channels according to the
build- in signal standard. The address of build- in signal
stand file is “d:/”.
Example: :CHSCanner:EDIT:LIST:MODify:STD
“1,d:/CDMA-AWS_DL.STD,13”
Key access: Meas > List Edit > > Edit > Edit Method Std> Signal Std
Delete Channel For List Sweep
:CHSCanner:EDIT:LIST:DELete <index>{,<index>}
This command deletes channels for list sweep mode.
Example: :CHSCanner:EDIT:LIST:DELete 1
Key access: Meas > List Edit > Delete