Keysight N9322C - Page 162

Command Reference
Channel Scanner Option Subsystem
154
Delete All Channels For List Sweep
:CHSCanner:EDIT:LIST:DELete:ALL
This command delete all channels for list sweep mode.
Example: :CHSCanner:EDIT:LIST:DELete:ALL
Key access: Meas > List Edit > Delete All
Query Channel Information For List Sweep
:CHSCanner:EDIT:LIST?
This command query the scan channel information for list
sweep.
Example: :CHSCanner:EDIT:LIST?
Query Custom Channel For List Sweep
:CHSCanner:EDIT:LIST:CUSTom?
This command query the custom channel information for list
sweep.
Example: :CHSCanner:EDIT:LIST:CUSTom?
Query Signal Standard Channel for List Sweep
:CHSCanner:EDIT:LIST:STD?
This command query the signal standard channel for list
sweep.
Example: :CHSCanner:EDIT:LIST:STD?
Set Edit Method For Top N Sweep
:CHSCanner:EDIT:TOP:METHod STD|CUSTom
:CHSCanner:EDIT:TOP:METHod?
This command specify the edit method for Top N sweep
mode.
Example: :CHSCanner:EDIT:TOP:METHod CUST
Key access: Meas > Scan Mode > Top N > Return > Range Edit > Edit Method