Keysight N9322C - Page 210

Command Reference
Power Meter Option Subsystem
202
Set Power Meter Average State
[:SENSe]:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AVERage[:STATe]?
Use this command to turn on/off power meter average state.
Example: :AVERage:STATe 1
Key access: Meas > General Setup > Average > Average On/Off
Set Power Meter Average Count Number
[:SENSe]:AVERage:COUNt <value>
[:SENSe]:AVERage:COUNt?
This command defines the power meter average count
number.
Range: 1 to 1024
Example: :AVERage:COUNt 10
Key access: Meas > General Setup > Average > Average > Avg Count
Set Power Meter Average Count Auto State
[:SENSe]:AVERage:COUNt:AUTO OFF|ON|0|1
[:SENSe]:AVERage:COUNt:AUTO?
This command toggles the power meter average count auto
state.
Example: :AVERage:COUNt:AUTO 1
Key access: Meas > General Setup > Average > Average > Avg Count
Power Meter Average Step Detect State
[:SENSe]:AVERage:SDETect OFF|ON|0|1
[:SENSe]:AVERage:SDETect?
Use this command to turn on/off step detect state.
Example: :AVERage:SDETect 0
Key access: Meas > General Setup > Average > Average > Step Detect On/Off