Keysight U1271A - Figure 3-7 Interval Log Display

Multimeter Features 3
Recording Measurement Data (Data Logging)
U1271A/U1272A User’s Guide 119
Figure 3-7 Interval log display
2 Press for more than 1 second to exit the interval
log mode.
The maximum number of readings that can be stored for the
interval log is 10000 entries for the U1272A and 200 entries
for the U1271A. When all entries are occupied, will
be shown when is pressed.
The interval and event log share the same memory buffer
(total combined: 10000 entries for U1272A and 200 entries
for U1271A). Increased usage of the interval log entries will
lead to the decrease of the maximum entries for the event
log, and vice versa.
See the “Reviewing Previously Recorded Data (View)” section
later in this manual to review or erase the recorded entries.
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
NOTE
When the interval log recording session is running, all other keypad
operations are disabled; except for , which, when pressed for more
than 1 second, will stop and exit the recording session. Furthermore, APO
(auto power-off) is disabled during the recording session.
H
z
%
m
s
L
o
g