Keysight U1271A - Setup Menu Summary

4 Multimeter Setup Options
Setup Menu Summary
128 U1271A/U1272A User’s Guide
Setup Menu Summary
The Setup menu items are summarized in the table below.
Click the respective “Learn more” pages for more
information on each menu item.
Table 4-2 Setup menu item descriptions
Legend Available settings Description Learn more on:
Hz, Hz,
Hz, Hz, or
Set the multimeter’s beep frequency from 3200 Hz to
4267 Hz or off. Default is 3491 Hz.
page 130
, , or
Enable the
for DC, AC, and AC+DC(U1272A only)
voltage and current measuring paths. Default is dC.
page 59 and
page 131
to counts
Set the multimeter’s AutoHold threshold count from 50 to
9999 counts. Default is 500 counts.
page 115 and
page 133
, , or
Set the multimeter’s data logging option (manual log,
interval log, or event log). Default is manual log (HAnd).
page 116 and
page 134
to s
Set the logging duration for interval logs from 1 to 99999
seconds (1 day, 3 hours, 46 minutes, 39 seconds). Default
is 1 second.
page 118 and
page 135
dBm, dBV, or
U1272A only — Set the multimeter to display voltage as a
dB value (dBm/dBV) or off. Default is dBm.
page 66 and
page 136
to Ω
U1272A only — Set the dBm reference impedance value
from 1 Ω to 9999 Ω. Default is 50 Ω.
page 66 and
page 137
to minutes or
Set the auto power-off timeout period from 1 to 99 minutes
(1 hour, 39 minutes) or off. Default is 15 minutes.
page 26 and
page 138
to s or
Set the LCD backlight timeout period from 1 to 99 seconds
(1 minute, 39 seconds) or off. Default is 15 seconds.
page 27 and
page 138
to V or
Set the multimeter’s voltage alert value from 0.1 V to
1010 V or off. Default is off.
page 28 and
page 140
mA, mA, or
Set the multimeter’s % scale selection (0-20 mA/4-20 mA)
or off. Default is 4-20 mA.
page 98 and
page 141
or
U1272A only — Set the multimeter’s thermocouple type
(type J or type K). Default is type K.
page 88 and
page 142