Multimeter Setup Options 4
Setup Menu Summary
U1271A/U1272A User’s Guide 129
Hz or Hz
Set the minimum measurement frequency (0.5 Hz or
10 Hz). Default is 0.5 Hz.
page 101 and
page 143
or
Set the baud rate for remote communication with a PC
(9600, or 19200). Default is 9600.
page 30 and
page 144
or
Set the data bit length for remote communication with a
PC (7-bit or 8-bit). Default is 8-bit.
page 30 and
page 145
, , or
Set the parity bit for remote communication with a PC
(none, even, or odd). Default is none.
page 30 and
page 146
or
Set the multimeter to flash the backlight during alerts.
Default is on.
page 74 and
page 147
to or
to
Set the primary display’s settling value from (0001.d) to
(9999.d) or (0001.E) to (9999.E). Default is disabled
(0009.d).
page 32 and
page 148
( to ) V/V,
A/V, or 000 (no unit)/V
Set the scale conversion value from (0000.1) to (1000.0).
The scale conversion unit can be set to V/V, A/V, or 000
(no unit)/V. Default is (1000.0) V/V.
page 110 and
page 149
Reset the multimeter to its factory default settings. page 150
, , , or
Set the multimeter’s temperature unit (Celsius,
Celsius/Fahrenheit, Fahrenheit, Fahrenheit/Celsius).
Default is °C (Celsius).
page 88 and
page 151
Table 4-2 Setup menu item descriptions (continued)
Legend Available settings Description Learn more on:
To Next Page
Loading...
