Keysight U1271A - Figure 3-8 Event Log Display

Multimeter Features 3
Recording Measurement Data (Data Logging)
U1271A/U1272A User’s Guide 121
Figure 3-8 Event log display
3 Press for more than 1 second to exit the event log
mode.
The maximum number of readings that can be stored for the
event log is 10000 entries for the U1272A and 200 entries
for the U1271A. When all entries are occupied, will
be shown when is pressed.
The event and interval log share the same memory buffer
(total combined: 10000 entries for U1272A and 200 entries
for U1271A). Increased usage of the event log entries will
lead to the decrease of the maximum entries for the interval
log, and vice versa.
See the “Reviewing Previously Recorded Data (View)” section
later in this manual to review or erase the recorded entries.
H
z
%
m
s
L
o
g
H
z
%
m
s
L
o
g
NOTE
APO (auto power-off) is disabled during the recording session.