Keysight U1271A - Changing the Variation Count; Figure 4-2 Filter Display

Multimeter Setup Options 4
Setup Menu Items
U1271A/U1272A User’s Guide 133
To enable/disable the Filter:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Press or until is shown on the
secondary display.
Figure 4-2 FiLtEr display
3 Press or to enable the filters ( is selected).
Select to disable the filters.
4 Press to save your changes or press to
discard your changes.
5 Press and hold until the multimeter restarts to return
to normal operation.
Changing the variation count
This setting is used with the multimeter’s AutoHold feature
(see page 115). When the variation of the measured value
exceeds the value of the variation count, the AutoHold
feature will be ready to trigger.
Setup
P
e
a
k
M
a
x
M
i
n
A
u
t
o
R
a
n
g
e
Exit
Dual
Setup
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup
Parameter Range Default setting
AHoLd (50 to 9999) counts 500 counts