Keysight U1271A - Changing the Thermocouple Type (U1272 A Only); Figure 4-12 Couple Display

4 Multimeter Setup Options
Setup Menu Items
142 U1271A/U1272A User’s Guide
Changing the thermocouple type (U1272A only)
This setting is used with temperature measurements (see
page 88). Select a thermocouple type that matches the
thermocouple sensor you are using for temperature
measurements.
To change the thermocouple type:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Press or until is shown on the
secondary display.
Figure 4-12 CoUPLE display
3 Press or to change the thermocouple type.
4 Press to save your changes or press to
discard your changes.
5 Press and hold until the multimeter restarts to return
to normal operation.
Parameter Range Default setting
CoUPLE tYPE K or tYPE J tYPE K
Setup
P
e
a
k
M
a
x
M
i
n
A
u
t
o
R
a
n
g
e
Exit
Dual
Setup
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup