Keysight U1271A - Table 1-9 Measurement Units Display; Measurement Units

Introduction 1
Your Multimeter in Brief
U1271A/U1272A User’s Guide 49
Measurement units
The available signs and notations for each measurement
function in your multimeter are described in Table 1- 9. The
units listed below are applicable to the primary display and
secondary display measurements of your multimeter.
Table 1-9 Measurement units display
Sign/Notation Description
M Mega 1E+06 (1000000)
k kilo 1E+03 (1000)
n nano 1E–09 (0.000000001)
μ micro 1E–06 (0.000001)
m milli 1E–03 (0.001)
dBm Decibel unit relative to 1 mW
dBV Decibel unit relative to 1 V
mV, V Voltage units for voltage measurement
A, mA, μA Ampere units for current measurement
nF, μF, mF Farad units for capacitance measurement
Ω, kΩ, MΩ Ohm units for resistance measurement
MHz, kHz, Hz Hertz units for frequency measurement
ms Millisecond, unit for pulse width measurement
% Percent, unit for duty cycle measurement
°C Degree Celsius, unit for temperature measurement
°F Degree Fahrenheit, unit for temperature measurement
s Seconds, unit for Peak and Recording mode elapsed time