Keysight U1271A - Changing the Temperature Unit; Figure 4-21 T-Unit Display

Multimeter Setup Options 4
Setup Menu Items
U1271A/U1272A User’s Guide 151
Changing the temperature unit
This setting is used with temperature measurements (see
page 88). Four combinations of displayed temperature unit(s)
are available:
• Celsius only: Temperature measured in °C.
• Celsius/Fahrenheit: During temperature measurements,
press to switch between °C and °F.
• Fahrenheit only: Temperature measured in °F.
• Fahrenheit/Celsius: During temperature measurements,
press to switch between °F and °C.
To change the temperature unit:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Press for more than 1 second until is
shown on the secondary display.
Figure 4-21 t-Unit display
3 Press or to change the temperature unit.
4 Press to save your changes or press to
discard your changes.
Parameter Range Default setting
t-Unit °C, °C-°F, °F, or °F-°C °C
A
u
t
o
R
a
n
g
e
A
u
t
o
R
a
n
g
e
Setup
S
h
i
f
t
V
i
e
w
E
s
c
Exit
Dual
Setup
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c