Keysight U1271A - Figure 2-29 Temperature Measurement Without Ambient Compensation

2 Making Measurements
Measuring Temperature
92 U1271A/U1272A User’s Guide
Temperature measurement without ambient compensation
If you are working in a constantly varying environment,
where ambient temperatures are not constant, do the
following:
1 Press to select compensation. This allows a quick
measurement of the relative temperature.
2 Avoid contact between the thermocouple probe and the
surface to be measured.
3 After a constant reading is obtained, press to set
the reading as the relative reference temperature.
4 Touch the surface to be measured with the thermocouple
probe and read the display.
Figure 2-29 Temperature measurement without ambient compensation
Exit
Dual
S
c
a
l
e
N
u
l
l