Keysight U1271A - Page 184

B Dual Display Combinations Using the Dual Key
184 U1271A/U1272A User’s Guide
Resistance measurement (Ω) Ambient temperature (°C)
[2]
Continuity test ( Ω)
Press to switch between the short or
open state.
Resistance measurement (Ω) with offset
compensation (Smart Ω)
Press to switch between the leakage and
bias display.
Diode test (V)
Ambient temperature (°C)
[2]
Auto-diode test (V)
Capacitance measurement (F) Ambient temperature (°C)
[2]
Temperature measurement (°C or °F) Ambient temperature (°C)
[3]
With the positive probe
inserted into the
terminal
DC current measurement (DC mA)
DC coupling frequency measurement (Hz)
AC current measurement (AC mA)
AC current measurement (AC mA)
AC coupling frequency measurement (Hz)
DC current measurement (DC mA)
AC+DC current measurement (AC+DC mA)
AC coupling frequency measurement (Hz)
AC current measurement (AC mA)
DC current measurement (DC mA)
% (0-20 or 4-20) DC mA DC current measurement (DC mA)
[2]
With the positive probe
inserted into the
terminal
DC current measurement (DC A)
DC coupling frequency measurement (Hz)
AC current measurement (AC A)
AC current measurement (AC A)
AC coupling frequency measurement (Hz)
DC current measurement (DC A)
AC+DC current measurement (AC+DC A)
AC coupling frequency measurement (Hz)
AC current measurement (AC A)
DC current measurement (DC A)
% (0-20 or 4-20) DC A DC current measurement (DC A)
[2]
Table B-2 U1272A dual display combinations (continued)
Rotary switch position Function shown (when is pressed) in the:
U1272A Primary display Secondary display
Exit
Dual
Smart
Exit
Dual
Exit
Dual
Auto